Механичка сеалка Koppert Dombo







Ако решите да купите опрема по ниска цена, проверете дали комуницирате со вистинскиот продавач. Дознајте колку што може повеќе информации за сопственикот на опремата. Еден од начините на измама е да се претстави како вистинска компанија. Во сличај на сомнеж, информирајте нѐ за тоа поради дополнителна контрола, преку образецот за повратни информации.
Пред да решите да направите купување, внимателно прегледајте неколку продажни понуди за да ја сфатите просечната вредност на избраниот модел на опрема. Ако цената на понудата која ви се допаѓа е многу пониска од таа на слични модели, размислете. Значителна разлика во цена може да укажува на скриени недостатоци или на обид на продавачот да направи измама.
Не купувајте производи чија цена премногу се разликува од просечната цена за слична опрема.
Не давајте согласност на сомнителни залози и плаќање на стоката однапред. Ако се сомневате, не плашете се да ги разјасните деталите, да побарате дополнителни фотографии и документи за опремата, да ја проверите автентичноста на документите, да поставувате прашања.
Најчест вид измама. Нечесните продавачи може да побараат одредена сума капар за да го „резервираат“ вашето право на купување опрема. Значи, измамниците може да соберат голема сума и да исчезнат и никогаш повеќе да не се појават.
- Пренос на плаќањето однапред на картичка
- Не плаќајте однапред без издавање на документ кој го потврдува процесот на трансфер на пари, ако продавачот во текот на комуникацијата ви станал сомнителен.
- Пренос на сметка на „доверител“
- Вакво барање треба да е алармантно, најверојатно комуницирате со измамник.
- Пренос на сметка на компанија со слично име
- Внимавајте, измамниците може да се скријат позади добри компании, правејќи мали измени во името. Не пренесувајте средства ако називот на компанијата ви е сомннителен.
- Замена на сопствени податои во фактурата на вистинската компанија
- Пред да направите трансфер, проверете дали наведените податоци се точни и дали се однесуваат на наведената компанија.
Контакти на продавачот




















- Continuous stainless steel cage wheels with differential and anti-slip rubber
- Height adjustable stainless steel smooth roller with scraper and depth indicator
- Vacuum pump with meter
- Mechanical clutch
- Seeding elements continuously adjustable over entire rear frame
- Drive by means of 11 hp Honda GX340 petrol engine
- 14 sowing units single row with coulter +seeding discs (radisch)
- Sowing width 160 cm ( 140 cm at the moment
- Extraction on the back of the elements
- Central large seed tray
- Fixed steering wheel, right seeding coupling, operator walks behind the machine
- Drag chain behind roll
- Hour 5952
This machine was previously used for radisch
With the right seed discs and gears suitable for crops such as lamb’s lettuce, spring onion, spinach, carrot and flowers
The "single" sowing unit. Over the years, Koppert has developed a sowing unit, which has amply proven in practice to meet the highest requirements. These seed elements are used on all our seed drills. The machine is therefore suitable for sowing almost all seeds, such as calibrated, coated and uncoated seeds, up to a diameter of approx. 4 mm. Some examples are: radish, spinach, lamb's lettuce, rettich, tomatoes, lettuce, carrots, leeks, celery, cauliflower, winter carrots, cabbage seeds and a very wide variety of flower seeds from cellosia to sunflowers. The "double" sowing unit This element has been specially developed for the season with large production per m2. In the spring, when high production per square meter is possible, the double sowing unit is used. With the aforementioned constructed coulter on the element, the seeds are neatly laid in the bandage in the ground. There is an interchangeable coulter in both the single and the double sowing unit, which are standard equipped with 60 to 80 holes. Different discs can be mounted depending on the type of seed and fraction (diameter). On one side of this disc, the seed is supplied from the seed house. On the other side is the vacuum chamber and the cleaning position. During sowing, the seed is sucked against the coulter. The adjustable scraper at the top of the seed housing ensures that one seed is extracted per hole. When the lowest point is reached, the vacuum drops, causing the seed to fall from the disc into the ground. If the seed is stuck, it is leveled. The hole is cleaned again using compressed air. Because 40% of the sowing unit is open, its operation can be easily checked. The cover plate and coulter are made of stainless steel, the protective cover of plastic and the housing of aluminum. All high-quality products to ensure trouble-free sowing.
More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call.
See all the available machines at our website.
- Since 1977 supplier of reliable used agricultural and horticultural equipment
- Machines are checked for delivery
- Experienced team
- We can help you with getting the machine to your company
Duijndam Machines
The specialist in used agriculture and horticulture machinery
= More information =
General condition: good
Price: On request